Publicidad
Idiomas disponibles
Idiomas disponibles
REVERSING THE DOOR SWING OF YOUR REFRIGERATOR
This unit has the capability of the doors opening from either the left or right side. The unit is delivered to
you with the doors opening from the left side. Should you desire to reverse the opening direction, please
call service for reversal instructions.
BUILT – IN CABINET INSTRUCTIONS
This unit is designed for both built-in or free standing installation. If you plan to use
this unit in a built- in application, please follow the requirements shown to the right.
ANTI-TIP BRACKET INSTALLATION
To reduce the risk of tipping the unit by abnormal usage or improper loading, the
appliance must be secured by properly installing the anti-tip device packed with the
appliance.
• Place the anti-tip bracket on the floor as shown in the figure. An anti-tip bracket must
be installed at both sides.
• Mark the locations of the 4 holes of the anti-tip bracket on the floor, refer to the location
drawing.
• Use a masonry drill bit and insert plastic anchors.
• Secure bracket to floor using screws.
• Slide appliance into position and make sure the leg engages the anti-tip bracket.
NOTE: If the unit is relocated, the bracket must be removed and installed in the new
location.
Cabinet Opening Dimensions
IN (min)
Width
25.75"
Depth
29"
Height
34 ½"
8
CM (min)
65.5
73.7
87.7
Publicidad
