6. The kettle will switch off automatically when the water boils.
• The power indicator light will go out.
• You can stop the boiling process by lifting the power switch.
NOTE: Use the kettle only when the lid is closed and the filter is in place.
Cut-out for boil-dry protection
If you operate the kettle without water, the kettle will stop heating and
automatically switch off.
If this occurs, allow the kettle to cool before filling with cold water and
re-boiling.
SPECIFICATIONS
Ratings: 220V-240V~ 50-60Hz
1850-2200W
CLEANING AND DESCALING
• Always unplug the appliance from the mains socket
and allow it to cool down before cleaning.
• Do not use chemical, steel wool or abrasive cleaner
to clean the appliance.
• Clean the outside of the ke le and the power base
using a slightly damp cloth.
• Remove the filter from the spout. Clean it under
running water and then replace it.
• Regularly descale the kettle using a specific descaler.
• Wipe the inside of the kettle with a clean cloth.
EN-5
EN