Publicidad
Idiomas disponibles
Idiomas disponibles
ART. 28/05200-00
User Instructions for
Digital Timer (NI-200)
Don't plug in an appliance where the load exceeds 16 A/ 3500W. Always
ensure the plug of any appliance is fully inserted into the timer outlet.
If cleaning of the timer is required, remove from mains power and wipe
timer with a dry cloth. DO NOT IMMERSE THE DIGITAL TIMER IN WA-
TER OR ANY OTHER LIQUID. Heaters and similar appliances should
never be left unattended during operation.
The manufacturer recommends such appliances not be connected to
timers.
BRIEF INTRODUCTION
1. This digital timer has 8 ON/OFF programs.
2. Manual ON/AUTO/Manual OFF selectable keys make selection of
desired setting easier.
3. 12/24 Hour mode selection.
4. SUMMER TIME function available (legal time), used in countries as
England, where summer setting is still the current local time.
5. RND function allows any programs already set to be delayed or
advanced by between 0 and 32 minutes.
6. 16 combinations of day or blocks of days available as follows:
Mo (Monday)
Tu
(Tuesday)
We (Wednesday)
Th
(Thursday)
Fr
(Friday)
Sa
(Saturday)
Su
(Sunday)
Mo, Tu, We, Th, Fr, Sa, Su
Mo, Tu, We, Th, Fr
Sa, Su
Mo, Tu, We, Th, Fr, Sa
Mo, We, Fr
Tu, Th, Sa
Mo, Tu, We
Th, Fr, Sa
Mo, We, Fr, Sa
INITIAL OPERATION
1. Plug the timer into a regular 220V power outlet and turn the power on.
2. Leave for approximately 12 hours to charge the memory back-up
battery.
3. When the battery is fully charged, clear all current information by
pressing RESET button with a sharp object such as a pen or pencil.
4. The digital timer is now ready to be set up for use.
SETTING CURRENT TIME AND DAY
1. Press and hold at the same time CLOCK and DAY buttons until
current day appears on the LCD display.
Then, press the HOUR button or the MINUTE button until current
hour and minutes appear on the LCD display.
During this setting, by leaving the DAY, HOUR or MINUTE buttons
depressed whilst the CLOCK button is depressed, the clock
will advance rapidly.
2. Release both buttons. Current time and date will appear on the LCD
display to confirm correct setting.
SETTING PROGRAMS
1. Press the TIMER button once time and release it.
The first ON setting can be made now.
2. Press the DAY button once time to set the day or block of days.
Set the first ON setting pressing the HOUR button and then press the
MINUTE button.
3. Press again the TIMER button to finish the first ON setting and entry
into the setting of the first OFF setting.
Repeat the above 2 step to set the first OFF setting.
4. Press again the TIMER button to finish the first OFF setting and entry
into the setting of the second ON setting. Repeat the above 2 and 3
steps to set the rest of desired ON and OFF settings.
ELCART DISTRIBUTION SPA via Michelangelo Buonarroti, 46 - 20093 Cologno Monzese (Milano) ITALY
Tel. +39 02.25117310 Fax +39 02.25117610 sito internet: www.elcart.com
La divulgazione dei dati contenuti in questa scheda è da ritenersi un servizio puramente informativo e non costituisce alcun vincolo da parte della Elcart in merito a prestazioni ed utilizzo del prodotto.
The divulgation of data contained on this technical sheet are exclusively for informational reasons and establish no link on behalf of Elcart regard to thr performances and the usa of the product.
La divulgacion de los datos contenidos en esta ficha son un servicio unicamente informativo y no constituyen ningun vinculo de parte de Elcart respecto a las prestaciones y uso del producto.
ELCART
Manuale di istruzioni/Scheda tecnica
5. To return to normal running process, press the CLOCK button after
you have finished programming.
EXAMPLE:
You want timer ON at 18.15 and OFF at 22.15 every day.
a. Press the TIMER button once time, the display shows 1_ON
b. Press the DAY button until the LCD displays shows "Mo, Tu, We, Th,
Fr, Sa, Su"
c. Press the HOUR button until the LCD displays shows "6:00 p.m."
or "18:00"
d. Press the MINUTE button until the LCD displays shows "6:15 p.m."
or "18:15"
e. Press again the TIMER button and the LCD displays shows 1_OFF
f. Repeat the above c. and d. steps until the LCD displays shows
"10:15 p.m." or "22:15"
ATTENTION:
Please read these instructions for you to decide the day settings you
require before you attempt to program the timer and check selected set-
tings in order to avoid overlapping of time settings if you choose a block
of days.
MANUAL ON / AUTO / MANUAL OFF SETTINGS
1. Press the ON/AUTO/OFF buttons to revert the three modes in turn.
2. The programs can only be executed in AUTO mode. When AUTO
is selected, the timer operates as the programs.
In MANUAL ON or MANUAL OFF mode all programs are ignored and
the timer doesn't operate. When MANUAL ON mode is selected,
power output is always ON. When MANUAL OFF mode is selected,
power output is permanently off.
4. When the mode is turned from MANUAL ON to AUTO, the timer will
keep the setting of MANUAL ON until to the next timer setting.
RANDOM FUNCTION (RND)
1. Press RND button in AUTO mode.
The LCD display shows the RANDOM word.
2. When RND function is set, it delays or advances the programmed start
and finish times for 0 to 32 minutes between 6.00 PM and 6:00 AM.
3. Press again RND button to turn off this function.
SET AM/PM or 24 HR CLOCK MODES
Press CLOCK and TIMER buttons simultaneously to change from AM/PM
mode to 24 hours mode (or vice versa).
SUMMER TIME FUNCTION
1. Press CLOCK and ON/AUTO/OFF buttons simultaneously in AUTO
mode. The LCD display shows the SUMMER word.
2. Clock moves backward 1 hour.
3. Press again both buttons to revert to winter time.
SPECIFICATIONS
Voltage:
Max load:
Minimum setting time:
Operating temperature:
Accuracy:
Battery backup:
User information ex art. 26 D. 49/2014
The symbol labelled on the appliance (Annex IX D. 49/2014) indicates that
the rubbish is subject to "separate collection" and it has been placed on the
Italian market after the December 31, 2010.
The user must therefore assign or (have collected) the rubbish to a
treatment facility according to indications by the local administration, or
hand it over to the reseller in exchange for an equivalent new product. The
separate collection of the rubbish and the subsequent treatment, recycling
and disposal operations encourage the production of appliances made
with recycled materials and reduce negative effects on health and the
environment caused by improper treatment of rubbish.
In the case of very small WEEE (no external dimension more than 25 cm),
the user is eligible to get free of charge assignation to retail shops with sales
areas relating to EEE of at least 400 m².
Ni-Mh 1,2V >100 hours
IMPORTED AND DISTRIBUTED BY:
ELCART DISTRIBUTION SPA
Via Michelangelo Buonarroti, 46
20093 COLOGNO MONZESE (MI)
ITALY
www.elcart.com - info@elcart.it
e-mail: info@elcart.it
PAGINA 2 DI 3
230/240VAC 50Hz
16 A, 3600W
1 minute
from -10°C to + 40°C
±1 minute per month
Made in China
Publicidad
