HON END BOOK SHELF Instrucciones De Montaje página 6

Illustration 12
Minifix cam
Illustration 13A
Minifix bolt
Dowel
Illustration 13B
Minifix bolt
Shoulder
6 OF 7
END BOOK SHELF
Arrow
Bottom
shelf
Minifix bolt
Shoulder
Top shelf
Minifix bolt
Dowel
Top shelf
12. Refer to Illustration 12. With arrows facing bottom shelf,
install seven minifix cams (from hardware pack) into
holes along bottom of end and brace panels.
Use the Phillips screwdriver to tighten minifix cams.
Turn minifix cams clockwise to tighten.
13. Refer to Illustration 13A for right handed units and 13B
for left handed units. Lay top shelf, with holes up, on
cardboard or a carpeted surface.
Use the rubber mallet to install five dowels (from hard-
ware pack) onto top shelf as shown.
Use the Phillips screwdriver to install seven minifix
bolts (from hardware pack) onto top shelf. Tighten each
minifix bolt until minifix bolt shoulder is flat against sur-
face of shelf.
RH
LH
2420956500_E
www.hon.com