NUTRIBULLET PRO Guia Del Usuario página 9

nutribullet
assembly & use.
PLEASE KEEP
THESE IMPORTANT
SAFEGUARDS IN
MIND WHEN USING
THE NUTRIBULLET ® :
• Make sure the base is
plugged in for use.
• Handle the extractor blade
assembly with care, as the
blades are sharp.
• Never run the nutribullet ®
while empty.
• nutribullet ® accessories are
not intended to be used in the
microwave as it may damage
the accessories.
• Never leave the nutribullet
®
unattended while in use.
Never blend hot ingredients
when using any nutribullet ®
cup.
Heated ingredients can
pressurize sealed containers
when agitated and violently
expel hot contents upon
opening. Always start the
blending process with room
temperature or refrigerated
ingredients and liquids
(21°C/70°F or cooler).
16
cup
®
1
Review all warning and
caution statements in the
Important Safeguards
section (pg. 2-7) before
proceeding to Step 2.
2
Place the motor base on
a clean, dry, level surface
such as a counter or table.
3
Add ingredients and liquid
to the nutribullet cup.
®
NOTE: Do not overfill! To avoid
leakage, do not add ingredients
beyond the MAX line.
4
Place the extractor blade
onto the cup and twist until
it is tightly sealed.
5
Plug the power cord into
an electrical outlet.
6
Turn the cup upside down
and place it onto the motor
base, gently push and twist.
7
Unlock the assembly
by gently pushing and
untwisting the cup
counterclockwise.
NOTE: Blending should not require
longer than one minute to yield
smooth and creamy results.
CAUTION
Do not remove the extractor blade
from the nutribullet cup until blending
®
has completely ceased. Do not use the
extractor blade as a storage lid for your
cup. Some foods may contain active
ingredients or release gases that will
expand if left in a sealed container,
resulting in excessive pressure buildup
that can pose a risk of injury. When
storing contents in the cup, use plastic
wrap or foil to seal your container.
Always point contents away from your
body when unsealing.
17