Toolland 3472 Manual Del Usuario página 5

 Only use the device for its intended purpose. Using the device in
an unauthorised way will void the warranty.
 Damage caused by disregard of certain guidelines in this manual
is not covered by the warranty and the dealer will not accept
responsibility for any ensuing defects or problems.
 Keep this manual for future reference.
3. Overview
Refer to the illustrations on page 2 of this manual.
1 OFF key
2 ON/METRIC/INCH
change over key
3 data output socket
4. Applications
Refer to the illustrations on pages 2 and 3 of this manual.
5. Cleaning and Maintenance
 Keep the device and the battery compartment clean and prevent
liquids from entering the electronic part to avoid damaged
electronics.
 Clean the device with petrol, lubricate the body with some clock
oil. Acetone and alcohol should not be used.
6. Troubleshooting
Problem
The 5 digits
change every
second
Displayed value
does not change.
V. 01 – 23/08/2016
3472
4
5
Cause
Battery voltage is
under 1.45 V
Circuitry
malfunction
5
battery cover
zero setting
Solution
Replace battery.
Remove the
battery and put it
back after 30
seconds.
©Velleman nv