Flex BW 18.0-EC Instrucciones De Funcionamiento Originales página 17

BW 18.0-EC / Detailing Set
Attach nozzles
WARNING!
Remove the battery before carrying out any
work on the power tool.
Mounting on the bayonet connection
 Attach the nozzle to the bayonet
connection by turning lightly in anti-
clockwise direction.
 Check that the nozzle is securely seated!
Disassemble
 Remove in reverse order.
Mount on extension
 Attach the nozzle on the extension by by
turning lightly in anti-clockwise direction.
 Check that the nozzle is securely seated!
Disassemble
 Remove in reverse order.
Mount filter
NOTE
The filter is mounted on the air inlet.
 Fit filter on air inlet and secure to bayonet
connection by turning slightly in
clockwise direction..
 Check filter for soiling at regular intervals
and clean if necessary (blow out).
Disassemble
 Remove in reverse order.
Switching on and off
CAUTION!
- Never direct the nozzle of the power tool
at other persons or yourself.
- Use personal protective equipment:
safety goggles, ear defenders and also
a respirator (or breathing protection) if
dust is agitated during operation of the
power tool. It is also recommended to
wear suitable footwear, long trousers and
gloves while working with the power tool.
- Keep hair and clothing away from
openings and moving parts.
17