Descargar Imprimir esta página

melitta MMF001FDKBK0 Manual De Instrucciones página 4

Publicidad

Idiomas disponibles

Idiomas disponibles

y Never touch rotating parts. Risk of
injury!
y By exceeding the filling capacity the
jug may overflow.
EN
y Appliance to be used only in
conjunction with the basic unit
provided.
FR
y Never operate appliance on uneven
surfaces.
y Use only fire blankets to extinguish
fires on appliances.
ES
y The appliance is not designed for
commercial or industrial use; it is for
household use only.
y Do not insert any objects and/or
fingers in the appliance apertures.
y Disable appliances prior to disposal,
cut off mains cable and take to an
official refuse site.
y Do not touch hot surfaces. Use
handles or knobs.
y To protect against fire, electric shock
and injury to persons do not immerse
cord, plugs and main unit in water or
other liquid.
y Close supervision is necessary when
any appliance is used by or near
children.
y Unplug from outlet when not in use
and before cleaning. Allow to cool
before putting on or taking off parts,
and before cleaning the appliance.
y Do not operate any appliance with
a damaged cord or plug or after the
appliance malfunctions, or has been
damaged in any manner. Return
appliance to the nearest authorized
service facility for examination, repair
or adjustment.
y The use of accessory attachments
not recommended by the appliance
manufacturer may result in fire,
electric shock or injury to persons.
4
y Do not let cord hang over edge
of table or counter, or touch hot
surfaces.
y Do not place on or near a hot gas or
electric burner, or in a heated oven.
y To disconnect, turn any control to
"off", then remove plug from wall
outlet.
y Do not use appliance for other than
intended use.
y Scalding may occur if the lid is
removed during the frothing cycles.
y Children should be supervised to
ensure that they do not play with the
appliance.
y If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
y Be care to avoid spillage on the
connector.
SAVE THESE INSTRUCTIONS !
POWER CORD
a. A short power-supply cord is provided
to reduce risks resulting from becoming
entangled in or tripping over a longer cord.
b. Longer detachable power-supply cords or
extension cords are available and may be
used if care is exercised in their use.
c. If a long detachable power-supply cord or
extension cord is used:
1.
The marked electrical rating of the
detachable power-supply cord or
extension cord should be at least as
great as the electrical rating of the
appliance;
2.
If the appliance is of the grounded
type, the extension cord should be a
grounding-type3-wire cord; and
3.
The longer cord should be arranged so
that it will not drape over the counter top
or table top where it can be pulled on by
children or tripped over.
OPERATION INSTRUCTION
1. TIPS
The following tips enable you to make the best
milk foam.
You can first use the frothing disk kit to
y
heat and froth the milk. When the frother is
working, you need to immediately prepare
coffee or hot chocolate.
It is best to use the whole milk to make the
y
milk foam. Different type of milk can create
different amount of foam.
This milk frother can make the frozen milk
y
into the milk foam. However, this does not
mean that this milk frother can make frozen
milk into the frozen milk foam because it will
produce certain heat during the frothing and
of course heating.
Milk can be heated to 140°F~167°F
y
(60~75°C). This temperature is optimal
because it neither weakens the smell of
coffee nor strengthens the flavor of coffee.
In particular, it is not necessary to wait long
before enjoying the coffee.
The frothing disk kit is relatively small.
y
Therefore, it is necessary to keep it in a safe
place to prevent it from being lost or eaten by
a child by mistake.
After using this milk froth, it is necessary to
y
clean it timely (Jug and lid can be cleaned in
a dish-washing machine) and then use a dry
towel to wipe it dry.
2. CLEANING AND MAINTENANCE
y Before cleaning always remove the plug
from the socket.
y Never immerse appliance or cord in the
water.
y Use a soft damp cloth to clean the exterior.
1. Cup: It is appropriate to clean the cup in a
dish-washing machine, or use cold water
and an appropriate amount of mild detergent
to gently clean the inside of cup till it is not
sticky and finally use a dry towel to wipe
it dry. It is not allowed to use any strong
detergent and hard cleaning tools such as
hard nylon brush or metal brush to wipe or
clean the cup in order to prevent the surface
of cup from being scratched.
2. Cup lid: It is necessary to take the cup lid
away from the cup and then clean it in a
dish-washing machine or directly clean it with
water (Note: It is not allowed to use the water
at more than 80°C to clean the cup lid.
3. Body of machine: It is necessary to use a soft
and wet towel to gently wipe its heating plate.
4. Stirrer: It is necessary to take it out from the
cup, clean it with clean water, wipe it dry and
then keep it in a safe place.
LIMITED WARRANTY
In addition to the legal warranty claims, to which
the end user is entitled relative to the seller, for
the device, if it was purchased from a dealer
authorized by Wabilogic Inc. due to his consulting
competence, we grant a manufacturer's warranty
under the following conditions:
1 year limited warranty from the date of original
purchase.
This warranty extends only to the original
y
retail purchaser or gift recipient. The original
sales receipt, as proof of purchase, is
required to make a warranty claim.
Defects that occur due to improper
y
connection, improper handling or repair
attempts by non-authorized persons are
not covered by the warranty. The same
applies for failure to comply with the use of
consumables (e.g. cleaning and decalcifying
agents) that do not correspond to the original
specifications. Wear parts (eg. Seals, valves
and burrs) and fragile parts are excluded from
the warranty.
This device was designed and built for
y
household use only. It is not suited for other
uses.
Warranty does not cover damages that are
y
not the responsibility of the manufacturer.
This is valid especially for claims arising from
improper use (e.g. operation with insufficient
current or improper voltage).
5

Publicidad

loading