SPECIFICATIONS
― ―
Water Tank Capacity:
3500ml
Voltage:
100-240V~
Power:
25W
Max mist output:
up to 300ml / hour
FEATURES
― ―
1.
Mist Lid
2.
Water tank
3.
Humidifier base
4.
LED light
5.
Control dial
6.
Power indicator light
7.
LED on/off button
8.
Aroma tray & cotton pad
9.
Water tank cap with filter
FILLING WATER TANK AND SWITCHING ON
― ―
1.
Lift the water tank off using two hands.
2.
Turn the water tank upside down and unscrew the water tank cap. The cap forms part of the
water filter which helps to eliminate contaminants in the water.
3.
Fill the water tank with cold water.
4.
Screw the water tank cap back onto the tank.
5.
Place the water tank back onto the base. Be sure to align the base correctly so it secures
into place.
6.
Turn the humidifier on by turning the dial clockwise. The power indictor light will turn green.
7.
Within a few seconds the mist will start coming through the mist lid. Use the control dial to
control the intensity of the mist.
6 of 44 | English
Size:
200 x 173 x 285mm
Frequency:
60Hz
Ideal Room Coverage: 25-35m²
Note: When the humidifier is low on water the power indicator light will turn red and
the mist will stop.
Do not move the humidifier once you have installed the water tank onto the base as this
could cause water to leak.
REPLACING THE FILTER
― ―
The ion-exchange resin filter is designed to remove impurities from the water and ensure
it stays clean for as long as possible. We recommend replacing your filter at least once every
6 months or 500 hours of use. The filter forms part of the water tank cap so to replace it, simply
unscrew it from the water tank and install the replacement.
To purchase additional filters, visit www.probreeze.com/products/humidifiers/3-x-replacement-
ion-exchange-resin-filters-3-5l-ultrasonic-humidifier/. If you have any questions or struggle to
find the specific filter you need, please contact our customer care team for friendly and efficient
help by emailing help@probreeze.com.
Scan to purchase
replacement filters.
English | 7 of 44