AnkerWork M650 Manual De Instrucciones página 9

LED
Steady blue for one second
Light off
Flashing red slowly
• To manually power on or off, hold the button on the receiver or
transmitter for 2 seconds.
• The receiver and transmitters will automatically power off after 30
minutes if they are not being used and are not connected.
Pairing
The receiver and transmitters will pair with each other when powered on.
When disconnected, place the receiver and transmitters into the case and they will
pair automatically.
• The LED indicator on the transmitter indicates the current status.
LED
Flashing blue rapidly
Steady blue
Flashing blue slowly
Status
Powered on
Powered off
Low battery
Status
Pairing
Connected
Disconnected
EN 07