Hilti Nuron SIW 4AT-22 Manual De Instrucciones Original página 23

4 Technical data
Rated voltage
Weight in accordance with EPTA Procedure 01, without battery
Torque adjustment
Rated speed under no load
Impact speed
Chuck
Large standard bolts
Large high-strength bolts
Storage temperature
Ambient temperature for operation
4.1 Battery
Battery operating voltage
Weight, battery
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
4.2 Noise information and vibration values in accordance with EN 62841
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools, or is poorly maintained, the data can vary. This can
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This can significantly reduce exposure over the total
working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise information
Sound power level (L
WA
Uncertainty for the sound power level (K
Emission sound pressure level (L
Uncertainty for the sound pressure level (K
Total vibration
Vibration emission value when tightening screws/bolts
and nuts of the maximum permitted size (a
Uncertainty for tightening screws/bolts and nuts of the maximum permit-
ted size
*2343759*
)
)
WA
)
pA
)
pA
)
h
2343759
21.6 V
1 kg
3 settings
Setting I 0 /min ... 1,000 /min
Setting II 0 /min ... 1,500 /min
Setting III 0 /min ... 2,300 /min
≤ 3,500 /min
/ " square drive with
1
2
ball-notch retention
M8 to M16
M6 to M12
−20 ℃ ... 70 ℃
−17 ℃ ... 60 ℃
21.6 V
See the end of these
operating instructions
−17 ℃ ... 60 ℃
−20 ℃ ... 40 ℃
−10 ℃ ... 45 ℃
103.5 dB(A)
3 dB(A)
92.5 dB(A)
3 dB(A)
B 22­55 8.0 m/s²
B 22­110 9.1 m/s²
1.5 m/s²
English 19