Ega Master 66001 Manual De Instrucciones página 18

1. Pull the lock knob out, "UNLOCK" sign should be visible.
2. Turn the grip in the clockwise direction to increase the torque, and in the counterclockwise
to decrease it. Please set torque going up the scale. If you exceed desired torque, please
adjust torque to one revolution below the desired torque, then back up.
The major scales show the amount of torque in both primary and scondary units. The minor
scale shows fine increments in primary units. See examples below.
3. Push the lock knob in to lock the grip. The minor scale may be slightly off the centerline mark
without affecting the accuracy of your settings.
18
SETTING TORQUE
"UNLOCK"
Unlock
setting torque
cover the sign
Lock