Publicidad
Following information and instructions
WARNING
Read all safety warnings, instructions, illustrations and specifications provided with
this power tool.
Failure to follow all instructions listed below may result in electric shock, fire and/or serious
injury.
▶ Save all warnings and instructions for future reference.
Read through and observe the following documents before commissioning:
• These operating instructions
• The accompanying "General safety notes for power tools" document
General safety notes
WARNING
Danger of fatal electric shock
The use of damaged electrical devices can lead to serious injuries or death as a result of an
electric shock.
▶ Before using, always check that the mains cable, mains plug and start button of the
electrical devices are undamaged and in perfect working order.
▶ Do not open electrical devices. Have defective mains cables or mains plugs replaced by
a qualified person.
▶ Connect electrical devices via a residual-current device.
▶ Avoid contact between the mains cable and the machine modules.
▶ Do not activate electrical devices until they have been mounted on the welding machine
and clean and dry Geberit PE or Geberit Silent‑db20 pipes or fittings have been clamped.
▶ Have electrical equipment checked according to local regulations.
WARNING
Risk of injury due to lack of safety equipment
▶ Any safety equipment that is present must not be modified or removed.
Maintenance and repairs only to be carried out by repair shops
Electric planes that are not maintained, or are not professionally maintained, can cause serious
accidents.
• Maintain the electric plane according to the regulations. See maintenance chapter.
• Maintenance and repair work may only be performed by authorised repair shops. The addresses of
authorised repair shops can be requested from the Geberit sales companies.
54043202661089163 © 02-2022
969.790.00.0(02)
EN
17
Publicidad
