KYONE ION-C 4100 Manual De Instrucciones página 12

ENGLISH
To clean the housing of the device, you can use a slightly damp (not wet) cloth. Do not use aggressive
or abrasive cleaning agents when cleaning the device.
If the cutting head takes off less hair after a while, it can be replaced with a new original one
(available as a spare part from KYONE).
Storage.
Only store the device in a charged state if you are not going to use it for a longer period of time. Keep
the device cool and dry and make sure that the device is protected against dust and other
environmental influences.
Lithium Stage-2 battery.
The Lithium Stage-2 battery is a completely new type of lithium battery. This battery maintains its full
capacity even after many charges.
Waste disposal.
This device is marked in accordance with the 2002/96/EC Directive on Waste Electrical and
Electronic Equipment (WEEE). This electrical device may not be disposed of with normal
waste at the end of its life, but must be handed in at a collection point for electrical
equipment. This also applies to electrical appliances that were last used in the non-private sector but,
for example, in industry or crafts. Insofar as the responsible, local, public waste disposal points do
not accept non-privately used electrical appliances; their waste advice point provides information on
environmentally friendly waste disposal.
The symbol on the product, the instructions for use or the packaging refers to this. The materials can
be recovered according to their identification. The reuse, recycling of materials or other forms of
recycling of waste equipment makes an important contribution to protecting the environment.
This electrical device contains a lithium battery. The battery should never be disposed of with
normal waste. Owners of old devices should generally separate old batteries and old
capacitors that are not enclosed by the old device before returning them to a collection
point. This does not apply if the old appliances are handed in to public waste disposal companies
(recycling point, recyclable materials point, etc.) and are separated there from other old appliances
for the purpose of preparation for recovery.
Technical data:
Model: ION-C 4100
Motor: DC-Motor
Battery: Lithium Stage-2
Operating time: up to 300 minutes
Cutting width: 45mm.
Subject to technical modifications.
Illustrations in this manual may differ from the original.
Input: 220-240Volt - 50/60Hz - 200Ma
Output: 5Volt - 1000Ma
Cable length: 2.5 m
Charging time: full charge 150 minutes
Weight: 237g
12