König Electronic CMP-USBNETBOX1 Manual página 3

Windows® XP
Software Installation
1. To install the USB Server program, please double click the USB Server setup file. A
dialog box should pop up to prompt you to choose a desired installing language. After
choosing the language, click on OK. The Installation Wizard will start automatically.
2. Follow the instructions of the wizard to complete the installation process.
Running Program
1. To start the USB Server program, please double click the shortcut icon of the USB
Server.exe file.
2. Push the "Search" button to see the current USB Servers and devices in the
network.
3. Press "Connect" when you've selected a device.
Note: Once connected, you can use the device in your network as if it is connected
to your PC's USB port. Do make sure that the software is installed on every
computer that needs to use the USB device.
Status of EST USB Servers and Devices
Green: Ready
Orange: Occupied by yourself, or establishing the connection
Red: Occupied by other user
Green with exclamation mark: Free with error
Orange with exclamation mark: Self occupied with error
Red with exclamation mark: Occupied by others with error
Red cross: unsupported device
Blue: The server's IP address is on a different network segment as from yours. You
can not connect the device to this server.
Note: Error can be: out of paper, out of ink or paper jam.
3