YATO YT-23247 Manual Original página 11

PRODUCT OVERVIEW
The cordless compressor is a device that allows for infl ating tyres or other objects, e.g., balls or mattresses with compressed air.
The product enables both the power supply from the battery and the electrical system of the vehicle with a voltage of 12 V. The
correct, reliable and safe operation of the device depends on its proper use, therefore:
Read the entire instructions manual before the fi rst use of the device, and keep it for future reference.
The supplier shall not be held liable for any damage resulting from failure to observe the safety regulations and recommendations
specifi ed in this manual.
PRODUCT EQUIPMENT
In the case of the YT-23247 article, the product is equipped with a battery and a dedicated charger. The article YT-23248 does not
have a battery and charger. Both articles are equipped with accessories to facilitate infl ating of various items.
TECHNICAL DATA
Parameter
Catalogue No.
Rated voltage
Rated power
Rated pressure
Infl ating capacity
Noise level
- sound pressure L ± K
pA
- power L ± K
wA
Weight
Protection rating
Battery type
Battery capacity
Charger*
Input voltage
Mains frequency
Rated power
Output voltage
Output current
Charging time**
* only for models equipped with a battery and charger
** the specifi ed charging time applies only to the battery with the capacity listed in the table
The declared noise emission value has been measured using the standard test method and can be used to compare one tool to
another. The declared noise emission value can be used in the preliminary exposure assessment.
Caution! Safety measures to protect the operator, which are based on an assessment of emission exposure under actual con-
ditions of use (including all parts of the work cycle, such as the time when the tool is turned off or idle and the activation time),
must be specifi ed.
SAFETY INSTRUCTIONS
Learn how to use the tool. Do not start working or charging before reading the instructions
manual. Following the guidelines contained in the instructions manual reduces the risk of
injury, electric shock or fi re.
The device is not intended for use in potentially explosive atmospheres in highly humid and
dusty environments. The temperature at the workplace should be within the range of +5
+40 C, and the relative humidity should not exceed 80%. The device should not be operated
O
O R I G I N A L
EN
Unit
[VDC]
[W]
[MPa / bar / PSI]
[l/min]
[dB(A)]
[dB(A)]
[kg]
[Ah]
[V~]
[Hz]
[W]
[VDC]
[A]
[h]
I N S T R U C T I O N S
Value
YT-23247, YT-23248
18
60
1.1/11/116
21
71.2 ± 3.0
82.2 ± 3.0
1.65
IPX0
Li-Ion
3
220 - 240
50 / 60
60
21 DC
2.4
1.5
C to
O
11