Systembuild Evolution 8036408COM Instrucciones De Montaje página 25

STEP 17
Insert the barrel of the lock (8a) into the hole as shown.
With the teeth of the lock nut (8c) facing the door
surface, tighten the lock nut (8c). Position lock bar (8b)
and attached the barrel of the lock (8a) with the lock
screw (8d). Lock bar (8b) will point to the right. When you
turn the lock with the key (8e), lock bar will rotate
counter-clockwise pointing straight up (unlock position).
G
8a
Keyway
Vertical
Flat / smooth surface
of lock barrel.
8c
systembuild.com
8b
8a
8c
8d
8c
8b
Teeth of lock will tighten
against the surface of
the door.
8d
8e
25
G
You
Tube