Step 29
IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE
INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT.
WARNING
Serious or fatal crushing injuries can occur
* Place heaviest items in the lowest drawers
do not set TVs or
other heavy objects on the top of this product
* Never allow children
to climb or hang on
drawers, door, or
shelves
* Never open more
than one drawer at a
restraints may only
reduce, but not
eliminate the risk of
through the safety bracket into the stud. Drive the screw through the safety bracket into the wall stud.
Locate your unit where desired against a wall and mark the wall through the safety bracket, then move
your unit aside. Drill diameter hole 7mm into the wallboard. Tap the wall anchor into the hole
ameriwoodhome.com
X1
TPB0017
35
For Masonry, Concrete,
or other wall materials:
Consult your local
hardware store for
appropriate anchors to
bracket.
HOLE
WALLBOARD
*raw edges are shaded
STUD