Supra SERENA Instrucciones De Uso página 8

and (8).
Confirm the desired temperature using the
button (5) or by waiting a few seconds.
During the appliance's use the pilot light (I) will
come on and off automatically, indicating the
heating elements are working, and therefore
maintaining the desired temperature.
HEATER FUNCTION
Select the desired heating power (3)
Led (II) is activate when power is at 1300W
Les (III) is activate when power is at 2000W
TEMPERATURE FUNCTION
Press the temperature button (5) to enter the
temperature setting function
Press (7) or (8) to adjust the temperature value
from 15°C to 35°C.
The display show setting temperature.
When the ambient temperature reaches the
set temperature, all functions will be turned off.
When the ambient temperature drops to 2°C
below the set temperature, the functions will be
restarted.
TIMER FUNCTION
The appliance's operating time can be
controlled.
To program the operating time simply select it
using the (2) button..Press (7) or (8) in order to
adjust the timing value in the range 0-24 hours.
The time programmed or remaining time will
appear on the display (VI).
ECO FUNCTION
Press button (4) to enter in Eco mode. Led (V)
is on.
This product automatically adjusts the heating
power according to the room temperature to
make energy saving.
When the ambient temperature is equal or less
than 18°C, the heating function at high power
2000W (III) will functioning.
When the ambient temperature is greater than
18°C and less than 25°C, heating power at
1300W (II) will functioning.
When the ambient temperature is equal or
greater than 25°C, all function are turned off.
OSCILLATION FUNCTION
The oscillation function makes it possible to
direct the flow from the apparatus so that it
automatically alternates over a range of 75º.
To activate this function, press the (6) button.
3-EN.indd 2 3-EN.indd 2
To deactivate this function, follow the
procedure for switching it on in reverse, press
again the (6) button
STAND-BY FUNCTION
In order to save energy, the appliance passes
to stand-by after 12 hours if the user does not
use it.
To turn it on again, you simply have to press
the on/off button.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE
Turn the appliance off using the on/off button
Turn the appliance off, using the on/off switch.
Unplug the appliance from the mains.
Allow to cool
Clean the appliance.
CARRY HANDLE/S
This appliance has a handle on the upper
part of the body, which facilitates comfortable
transportation. (B)
ANTI-TIPPING SAFETY DEVICE
The appliance has an anti-tipping safety device
that turns it off if the working position is not the
correct one.
SAFETY THERMAL PROTECTOR
The appliance has a safety device, which
protects the appliance from overheating.
When the appliance switches itself on and
off repeatedly, for reasons other than the
thermostat control, check to ensure that there
are no obstacles that impede correct air entry
or expulsion.
If the appliance turns itself off and does not
switch itself on again, disconnect it from the
mains supply, and wait for approximately 15
minutes before reconnecting. If the machine
does not start again seek authorised technical
assistance.
CLEANING
Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
Do not use solvents, or products with an
acid or base pH such as bleach, or abrasive
products, for cleaning the appliance.
Do not let water or any other liquid get into the
4/4/22 10:38 4/4/22 10:38