Sebson AC OUT TIMER D1 Manual Del Usuario página 7

General safety information:
Danger:
In case of damages or contact with water turn off this product immediately without tension and make sure
that a restart is no longer possible!
Danger of suffocation:
parts that can be swallowed!
Caution:
Avoid overloading the device, an overload can damage the device or cause a short circuit! Therefore,
please note the maximum power consumption in the technical data!
▪
The remodeling of this product is not allowed! The proper and safe functioning of the device can no longer
be guaranteed if it is modified! In addition, this will invalidate the warranty claim!
▪
The manufacture does not accept any responsibility for injuries or damage resulting from improper use of
this product!
▪
Any other use than the description may result in damage to the product. So the dangers are such as
electric shock, short circuit, fire etc.
▪
We reserve the right to make changes to the product, the packaging or the operating instructions as well as
printing errors.
▪
This product is suited for indoor- and outdoor-use.
▪
Protect the product from external damage, heavy dirt, moisture and excessive heat!
▪
In order that the warranty claim does not expire please use only the supplied items. Repairs may only be
done by an expert and only by using original spare parts!
▪
In commercial institutions, the accident prevention regulations of the professional trade association for
electrical equipment and facilities must be adhered to.
General product information:
▪
10 different time periods programmable
▪ Weekday in 16 combinations selectable (see table: „ Overview of the selectable combinations"). Note: The
weekdays are shown in the table („Meaning of the abbreviations") lists the abbreviations in each language.
▪
The timer can be switched on and off manually.
▪
Random function
▪
Daylight saving time adjustable
▪ The modus can be activated by pressing the button "CLOCK" and "TIME" at once.
Start up:
Danger:
Do not close several switches consecutively! Danger of overheating!
Attention:
Take the product out of the socket if you do not use the product for an extended period of time!
▪
Please observe the safety instructions and technical data before installing this product!
▪
Operate this product at a suitable power outlet (230V AC 50Hz).
▪
Before you will start the timer, the built-in battery, used to store the settings, must be charged. Connect the
timer to the wall socket about 14 hours.
▪
After the battery is charged, press the "MASTERCLEAR" button with a pointed object. This deletes the
preconfigured settings.
Set the current time and the daylight saving time:
▪
Before setting the current time, the current weekday is set. To do this, hold down the "CLOCK" button and
select the current weekday with the "WEEK" button.
▪
Press and hold the "CLOCK" button to set the current time using the "HOUR" (for hours) and "MIN" (for
minutes) buttons.
▪
Release the "CLOCK" button.
▪ To set the 24 hour or 12 hour-view, press the two buttons "CLOCK" and "TIMER" simultaneously.
Please keep this product away from children and animals. The packaging contains small
7