Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTION MANUAL
FRESCO
REF. 200093201B • 200093203B
INSTALLATION
_____________________________________________________________________________
1. Remove the fixation support from the motor assembly.
2. Assemble the mounting bracket on the ceiling (ensure that a mini-
mum moving weight of 15.8kg=35Lb is attached to support the fan).
3. Place the motor assembly on the J hook of the mounting bracket
and connect the control receiver (according to the remote control
connection diagram).
4. Assemble engine components to mounting bracket. Be sure there
is no threads hanging and to tighten the screws securely.
5. Use the screws to mount the flaps to the bracket. Repeat the
process for the remaining fan blades, making sure to tighten the
screws securely.
6. Remove the fan motor assembly blade holder screw. Secure the
blade holder to the fan motor with a blade holder screw and repeat
this procedure for the remaining blade holders.
7. Connect the 9 entrance plug on the bottom of the fan motor to
the 9 entrace plug on the lamp. Make sure it is completely jammed.
Loosen the screw to secure the LED (light) module to the motor
assembly by tightening the screws.
RECETOR
CEILING CUP
8. Connect the two plugs to turn on the LED module. Place the LED
in the center of the panel.
[ EN ]
12
Publicidad
