Remaining Risk Factors - Zipper ZI-GPS70G Manual De Instrucciones

TWIG SAW:
• Pruning Saw at startup safely support and hold. Bar and chain must be free
• Interface with full chain speed start
• Do not continue cutting service commenced in section
• Do not remove the same the whole road, but they work piecemeal from the end of
the branch in the direction of strain.
• Be careful at the end of the cut. Change in weight can lead to accidents.
• Be them. Possible to balance and falling back and flung branches
• Pruning only remove chain is running out of the cut.
• Should jamming immediately and use for free Get a wedge
TRANSPORT NOTES:
• Switch off the engine
• Fit the blade guard
• Secure the machine
• tank completely empty, avoid fuel spillage
• To avoid damaging unit never grind but always lift correctly.
STORAGE NOTES:
• cutting tools remove and clean
• Fit the blade guard
• Clean the machine and wait to dry
• tank completely empty, avoid fuel spillage
• machine before storage can always cool
• Store in a dry, out of reach of children place, well packaged (protection against
cuts)
• Never store the machine with fuel in the tank inside a building where gasoline
fumes may open flame or sparks can come into contact
A first aid kit in accordance with DIN 13164 should always be readily available for a
possible accident. Initiate the violation in accordance with the necessary first aid
measures. When requesting support, provide the following details:
1. Place of accident
3. Number of injured people
12.3

Remaining risk factors

Working with a brush cutter always poses some risks that cannot be eliminated entirely:
Noise: Working for a long time can damage your hearing if you do not have a very good
hearing protection.
Risks of injury:
Be aware that the cutter might stall and lead you to fall.
Small objects might be caught by the machine and catapulted into the air.
The contact with the rotating moving cutter causes severe injuries! Protect especially your
feet by wearing reinforced security shoes.
Never get with your fingers or hands near the rotating moving cutter.
Do not touch the muffler or other machine components during operation – They become hot!
Z.I.P.P.E.R MASCHINEN GmbH  www.Zipper-maschinen.at
Gartenpflegeset / Garden maintenance set ZI-GPS70G / ZI-GPS182G
N O T I C E
Emergency procedure
2. Type of accident
4. Injury type(s)
SAFETY
Seite 44