Descargar Imprimir esta página

Teac MC-D3 Manual Del Usuario página 18

Publicidad

Idiomas disponibles

Idiomas disponibles

TIME MODE
MEMORY
TIME SET
< The unit can be programmed to turn on at a specified time.
< The unit will automatically turn off 60 minutes after the speci-
fied time.
< Adjust the clock before setting the timer.
1
Press the TIME MODE button repeatedly until TIMER ON indi-
cator appears on the display.
Each time the TIME MODE button is pressed, the display is
changed as follows:
When the power is on:
(source)
TIMER OFF
When the power is off:
TIMER OFF
2
Press the MEMORY/TIME SET button.
The "hour" value starts blinking.
3
Set the start time (hour) by pressing the SKIP buttons, and
press the MEMORY/TIME SET button.
The "minutes" value starts blinking.
4
Set the start time (minutes) by pressing the SKIP buttons, and
press the MEMORY/TIME SET button.
5
Press the TIME MODE button.
TIMER OFF indicator appears on the display.
< If you want to turn off the unit anytime within 60 minutes from
the start time, you can set the off time, otherwise the unit will
automatically turn off after 60 minutes. If you aren't interested
in setting the off time, proceed to step
1. Press the MEMORY/TIME SET button.
The "hour" value starts blinking.
2. Set the off time (hour) by pressing the SKIP buttons, and
press the MEMORY/TIME SET button.
The "minutes" value starts blinking.
3. Set the off time (minutes) by pressing the SKIP buttons, and
press the MEMORY/TIME SET button.
6
Press the TIME MODE button.
Now the timer setting has been finished, and "TIMER" and "ON"
lights on the display.
18
Timer Setting
SKIP
.//
clock
TIMER ON
clock
TIMER ON
6
.
Timer Playback
1
Set the start time.
2
Select a source by pressing the CD, TUNER or TAPE button.
Prepare the source. When you select "TUNER", be sure a sta-
tion is tuned in.
3
Press the POWER switch to turn the unit off (standby).
When "TAPE" is selected, press the PLAY button of TAPE and
leave it depressed. The unit will turn on at the specified time
and the tape will begin playing.
Timer Recording
1
Set the start time.
2
Load a recordable cassette tape into the cassette holder.
3
Select a source to be recorded by pressing the CD or TUNER
button.
< Do not select "TAPE". You will record to the tape from either a
CD or the tuner so select the source you wish to record FROM.
< When you select "TUNER", be sure the proper station is tuned.
4
Press the POWER switch to turn the unit off (standby).
5
Press the RECORD button.
The unit will turn on and start recording at the specified time.
To turn OFF the timer feature
1
Press the TIME MODE button repeatedly until "TIMER" and
"ON" (or "TIMER" and "OFF") appears on the display.
While "ON" or "OFF" lights steadily, "TIMER" blinks.
2
Press the TIMER button.
"TIMER" and "ON" (or "TIMER" and "OFF") start blinking.
Each time the TIMER button is pressed, the timer mode is
changed as follows:
blinking "TIMER" and blinking "ON" : timer is inactive.
blinking "TIMER" and solid "ON" : timer is active.
3
Press the TIME MODE button once or twice to display the
clock (or current source).
"TIMER" and "ON" (or "TIMER" and "OFF") go off.

Publicidad

loading