Important Tips
•
Never
pour water directly into the
base chamber.
Only
water tank.
[Figure 2.3]
will automatically release the correct
amount of water into the base chamber.
•
Avoid moving or shaking the humidifier.
[Figure 2.4]
This may cause the water
tank to release too much water into the
base chamber.
Figure 2.3
Figure 2.4
add water to the
The humidifier
•
Before moving the humidifier, turn it off,
unplug it, and remove the water tank.
If your humidifier doesn't produce mist
•
correctly, check the max water line to
see if there is too much water in the
base chamber.
[Figure 2.5]
extra water if water is over the max line.
Note: The max water line is only for this
purpose. Do not pour water into the base .
Figure 2.5
EN
Pour out any
9