BEFORE DOING ANY WORK ON YOUR VACUUM, TURN THE UNIT OFF AND DISCONNECT THE PLUG
FROM THE WALL OUTLET.
PROBLEM
Suction weakens or
cleaner runs hot
Misitng in the
exhaust air
PAGE 10
TROUBLESHOOTING
CAUSE
Clogged filter
Air leak
Obstruction in hose
or nozzle
Saturated filter
SOLUTION
Brush dirt from filter. If condition continues, change
filter.
Check all fittings for tight fit (nozzles, hose, etc.)
Check that tank cover is sealed properly.
Check nozzle, hose, etc. for obstructions, and
remove if present.
Replace saturated filter with a dry filter.