Blackview Tab 11 Serie Manual De Instrucciones página 2

English
Charger/Type-C
To make sure your pad be able to call, put the
SIM card in the following order.
Press the card pin into the side hole and then the card
tray pops up and pull out it.
Take out the card slot and place the Nano card or Nano card
and TF card with the metal side facing down. Make sure the
bevel angle is aligned with the bevel angle of the card slot
and placed in the corresponding card slot.
SIM 1 SIM 1
SIM 2
With the pad facing up, insert the card holder into the
pad in the direction of the arrow.
Safety- In order to ensure safely using Maintenance
7
the product, you must strictly abide by
Thoroughly understand the maintenance of this pad to
the following rules
use the pad more safely and e ectively, and extend the
service life of the pad as much as possible.
The pad should be at least 15 cm away from any
Please follow the instructions in the manual to open the
medical implant or rhythm adjuster and never put the
pad, disassemble the accessories, and do not try other
device in your coat pocket.
methods.
Do not expose the device and other batteries together
Please avoid falling, knocking or shaking your pad. Rough
with the high temperatures or heat-generating equipment
handling of the pad can cause the screen to rupture,
such as sunlight, heaters, microwave ovens, ovens or water
damaging the internal circuit board and the delicate structure.
heaters. Overheating of the battery can cause an explosion.
Do not use chemical solvents or detergents to clean your
When charging is complete or not charging, disconnect
pad. Wipe the pad case with a soft cotton cloth dampened
the charger from the device and unplug the charger from
with water or a mild soap.
the power outlet.
Clean the lens with a clean, dry, soft cloth.
If the device is equipped with a non-removable battery,
(Example: camera lens) and display.
do not replace the battery yourself to avoid damaging the
If you encounter an abnormal image such as a crash during
battery or device.
use, the processing method is as follows: For a pad that
Use of an unapproved or incompatible power source,
cannot remove the battery, please press and hold the
power button for more than 12 seconds, the pad will be
hazards.
forced to restart (unlock the pad when restarting)
Do not disassemble or reset the battery, insert other objects,
It can solve the general bug; for the pad that can remove
immerse in water or other liquids to avoid battery leakage,
the battery, please remove the battery, then insert the
battery and restart it to solve the bug.
Do not drop, crush, scratch or puncture the battery to When the charger is not in use, please unplug it from the
avoid subjecting the battery to excessive external pressure,
power outlet. Do not connect the battery that has been
resulting in internal short-circuit and overheating of the
fully charged to the charger for a long time, as overcharging
battery.
will shorten the battery life.
The company does not bear the responsibility for accidents
caused by non-standard related charging equipment.
If you want to read the full CE accompliance, please check
this link: http://www.blackview.hk/ce/