Publicidad
Idiomas disponibles
Idiomas disponibles
1
1
EN
EN
Order No.
CTBAW213
CTBAW273
CTBAW383
CTBAW503
CTBAW653
CTBPW05Q
CTBPW10Q
CTBPW15Q
8.4
Ambient conditions
Features
Operation site
Working temperature
Storage temperature
Type of cooling
Relative humidity
Working height
Degree of protection EN 60529
9
Troubleshooting
Problem
Tool does not start.
Tool not recognized.
Tool doesn't start with counter-
clockwise rotation activated.
Tool starts in tightening direc-
tion, but not in counterclock-
wise rotation.
12
Sound Level
Free Speed
ISO 15744
dB(A)
<70
<70
<70
<70
<70
<70
<70
<70
Data
Indoors
0 °C
-25 °C
Convection (self-cooling)
10 %
Up to 3000 m (9,843 ft) above sea level
IP40
Possible cause
No speed programmed.
Controller is waiting for tool en-
ablement.
Fast-Apps mode disabled.
Self-identification data are not
recognized after tool change.
Software is incorrect.
FastApps mode is activated.
Tool is defective.
With counterclockwise rotation,
parameter for speed is set to
1
0
/min.
No speed programmed for
counterclockwise rotation.
Faulty reverse switch
P2543BA | 2022-10
Sound Level
Vibration Level
Uncertainty
No Load
ISO 28927-2
(m/s²)
±3
<2,5
±3
<2,5
±3
<2,5
±3
<2,5
±3
<2,5
±3
<2,5
±3
<2,5
±3
<2,5
40 °C
65 °C
90 % no condensation
Measure
Check Linking group. In the mPro mode, select
Navigator> Standard or Navigator> Basic.
Check FastApps. In the FastApps mode:
.
Enable the input Tool Enable or, if not required,
deactivate Tool Enable.
Enable FastApps mode:
Accept Tool Settings again:
1.
Navigator > Tool Setup.
2.
Select the line with the tool.
3.
Select Tool Settings> Accept.
Check controller and measuring card software.
Disable FastApps mode to connect to the control-
ler.
Change tool.
Parameterize Speed left rotation
Select on the controller Navigator > Standard >
Tool Groups > Settings For Speed Left Rotation.
Parameterize Speed left rotation
Select on the controller Navigator > Standard >
Tool Groups > Settings For Speed Left Rotation.
Replace Start/Reverse switch assembly.
Vibration
Level
Uncer-
tainty
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
>
>
>
.
Apex Tool Group
Publicidad
