BUTURE BR800 Manual Del Usuario página 7

To Jump Start Your Car
To jump start the vehicle battery, put the vehicle in park (neutral if the vehicle has a
manual transmission) and engage the emergency brake. Locate the battery for the
vehicle and follow the steps listed below.
Jump cables are color-coded, RED for POSITIVE(+) and BLACK for NEGATIVE(-)
Do not mix up the cables or allow the metal ends to touch together because this
may damage the battery charging system and/or electronics on a vehicle.
NOTE:
This product is for 12V car only. Check to make sure that 3 or 4 indicator lights
are illuminated (battery level is above 50%) before you use it to start your car.
Step1:
Insert the plug of the smart battery clamp completely into the jump starter. If the
green and red light indicators on the battery clamp are flashing alternately, you are
safe to move on to the next step.
Step2:
Connect the red clamp to the positive terminal(+) of the car battery and connect the
black clamp to the negative(-) of the car battery. If the indicator light of the smart
clamp is solid green, you can move on to the next step.
05