Publicidad
Idiomas disponibles
Idiomas disponibles
5
Assembly Instructions
1. Check that the control knob (l) for the gas supply
system is turned to the "OFF" position before starting
any assembly.
2. Remove door from body (B) and place propane gas
tank (not included) into the metal stand inside of the
body (B).
3. Turn the cylinder valve on the tank clockwise to close
the propane tank. Attach the preassembled regulator
from the body to the cylinder valve by turning the
regulator coupling nut clockwise. Make sure it is
fastened securely and tighten connections by hand
only.
WARNING
Please inspect the rubber O ring in the propane tank
valve to ensure it is not wom before attaching regulator.
Wom rubber O ring can cause leaks, explosions and
serious injury by propane tank.
3330-A Marathon Ct Charleston, SC 29418
Visit Us: Camplux.com
www.camplux.com
Black Coupling Nut
Turn Clockwise To Connect
Regulator
1(844) 538-7475
Pressure
Cylinder Valve
Relief Valve
Turn Clockwise
To Reseal
Rubber O Ring
support@camplux.com
I
B
Bleed-off
Valve
Publicidad
