AnkerWork M650 Manual De Instrucciones página 2

Important Safety Instructions
Store in a cool and dry place.
•
Do not store the product in a hot or humid environment.
•
Operating temperature should be between 0°C to 40°C.
•
Do not disassemble the product or make unauthorized alterations to the product; doing so may compromise safety, regulatory compliance, system performance, and
•
may void the warranty.
Do not clean the product with harmful chemicals or detergents.
•
Misuse, dropping, or excessive force may cause product damage.
•
Do not subject the product to mechanical shock, crushing, or cutting.
•
Do not short-circuit the product or let it be short-circuited by other metal objects.
•
To reduce the risk of injury, close supervision is necessary when this product is used near children, or keep the device out of the reach of children.
•
Do not use the device if it is damaged or modified. It may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
•
Do not install this equipment near any heat sources or in a confined space, such as a bookcase or similar unit, and ensure it remains in a well-ventilated area.
•
Do not listen at a high volume for an extended period using monitor earphones. Otherwise, you may experience possible hearing damage.
•
Do not allow the product to come into contact with any kind of liquid. If the inside battery comes into contact with water, chemical decomposition may occur, potentially
•
causing fire or explosion.
The product generates stronger permanent magnetic fields that could cause interference with cardiac pacemakers, implanted defibrillators (ICDs) and
other implants. Always maintain a distance of at least 3.94"/10 cm between the product component containing the magnet and the cardiac pacemaker,
implanted defibrillator, or other implant.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Notice
This product complies with the radio interference requirements of the European Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive
2014/53/EU and 2015/863/EU. For the declaration of conformity, visit the Web site https://uk.anker.com/.
Transmitter maximum output power: 15.68 dBm
Receiver maximum output power: 11.82 dBm
Frequency band: 2.4G band (2.404GHz-2.480GHz)
For this device, body SAR was performed with the device configured in the positions according to EN62209-2:2010, and body SAR was performed with the device
0mm from the phantom.
EN 01