Hinkley 30 FINNIGAN Manual De Instrucciones página 16

Idiomas disponibles

CARE AND CLEANING

Periodically it may be necessary to re-tighten screws to prevent clicking or humming sound during operation. This is especially true in

climates with broad temperature and humidity ranges.

When dusting the blades, you must support the blade to prevent bending - no pressure should be applied to the blades. If you

experiance any ﬂaws in the operation of your fan, please check the following points.

TROUBLESHOOTING

PROBLEM

SOLUTION

FAN WILL

1. Check main and branch circuit breakers and/or fuses.

NOT S TART

2. Check line wire connections to fan housing wiring. Make sure forward/reverse switch is set to one or the other

position, not stuck in between.

1. Check and make sure that all screws in motor housing are snug (but not over tight).

FAN SOUNDS

NOISY

2. Check that wire connectors in canopy are not rattling against each other

3. Check that all bulb(s) are well held in the sockets.

4. Check that the canopy is ﬁrmly attached to hanging bracket and not vibrating against ceiling.

5. Check to assure set screws on both ends of downrod are tight (motor couple and hanger

ball)

CAUTION:

Switch oﬀ power su pply bef ore c arrying out an y of these check s.

| hinkley.com |