Descargar Imprimir esta página

Levenhuk LabZZ T1 Guia Del Usuario página 5

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
Levenhuk LabZZ T1, T2, T3 Telescopes
Dear friend!
Levenhuk LabZZ T Series Telescopes for kids will open up the amazing world of exciting scientific discoveries! With the
telescope you can study the Moon, planets and bright stars, unravel the mysteries of the endless Cosmos and observe
the most distant objects. Your experience with the telescope will be both informative and entertaining. Carefully read
the entire manual before operating the telescope. Don't lose it; you might need it later.
CAUTION! Never look at the Sun and the sky around it through a telescope! It can ruin eyesight and even cause
blindness!
Information for parents
Dear adults! Remember that you are responsible for your child at all times. Always ensure the child's safety when
working with the telescope. Read this entire manual carefully, especially the handling and maintenance instructions.
Even if your child is old enough and reads well, repeat all the rules aloud one more time before beginning to work with
the instruments. Make sure that he or she clearly understands these instructions.
CAUTION! CHOKING HAZARD! These devices include small parts. The telescopes are designed for children over
5 years of age and should only be used under adult supervision.
Care and maintenance
• Never, under any circumstances, look directly at the Sun through this device without a special filter, or look
at another bright source of light or at a laser, as it may cause PERMANENT RETINAL DAMAGE and may lead to
BLINDNESS.
Take the necessary precautions when using the device with children or others who have not read or who do not
fully understand these instructions.
Do not try to disassemble the device on your own for any reason. For repairs and cleaning of any kind, please
contact your local specialized service center.
Stop using the device if the lens fogs up. Do not wipe the lens! Remove moisture with a hair dryer or point the
telescope downward until the moisture naturally evaporates.
Protect the device from sudden impact and excessive mechanical force.
Do not touch the optical surfaces with your fingers. Clean the lens surface with compressed air or a soft lens
cleaning wipe. To clean the device exterior, use only the special cleaning wipes and special tools that are
recommended for cleaning the optics.
Store the device in a dry, cool place away from hazardous acids and other chemicals, away from heaters, open
fire, and other sources of high temperatures.
Replace the dust cap over the front end of the telescope whenever it is not in use. Always put eyepieces in
protective cases and cover them with caps. This prevents dust or dirt from settling on the mirror or lens surfaces.
Lubricate the mechanical components with metal and plastic connecting parts. Components to be lubricated:
• Optical tube;
• Fine mechanics (focuser rail, telescope optical tube microfocuser);
• Mounting;
• Worm-and-worm pairs, bearings, cogs, threaded mounting gears.
Use all-purpose silicon-based greases with an operating temperature range of −60 ... +180°С (−76 ... +356°F).
• If a part of the device or battery is swallowed, seek medical attention immediately.
• Children should use the device under adult supervision only.
Seek medical advice immediately if a small part or a battery is swallowed.
How to work with the telescope
It is very important to assemble the telescope correctly so it works the right way
Try to remember the names of its parts, where each part goes and what it's needed for
telescope with adult help.
1. Open the box and put out all the parts. Double-check the box when it's empty — some small parts might still be in
there.
2. Spread the tripod legs and install it on a flat surface so it is stable. The tripod height is adjustable.
2
5
. Examine the telescope carefully.
. It's better to assemble the
1
EN

Publicidad

loading

Productos relacionados para Levenhuk LabZZ T1

Este manual también es adecuado para:

T2T3