Publicidad
Idiomas disponibles
Idiomas disponibles
7.
Use the correct power tool
- Do not use low-output machines for heavy work.
- Do not use the power tool for purposes for which it
is not intended. For example, do not use handheld
circular saws for the cutting of branches or logs.
8.
Wear suitable clothing
- Do not wear wide clothing or jewellery, which can
become entangled in moving parts.
- When working outdoors, anti-slip footwear is rec-
ommended.
- Tie long hair back in a hair net.
9.
Use protective equipment
- Wear protective goggles.
- Wear a mask when carrying out dust-creating
work.
10. Connect the dust extraction device
- If connections for dust extraction and a collecting
device are present, make sure that they are con-
nected and used properly.
11. Do not use the cable for purposes for which it
is not intended
- Do not use the cable to pull the plug out of the
socket.
- Protect the cable from heat, oil and sharp edges.
12. Secure the workpiece
- Use the clamping devices or a vice to hold the
workpiece in place. In this manner, it is held more
securely than with your hand.
13. Avoid abnormal posture
- Make sure that you have secure footing and al-
ways maintain your balance.
14. Take care of your tools
- Keep cutting tools sharp and clean in order to be
able to work better and more safely.
- Follow the instructions for lubrication and for tool
replacement.
- Check the connection cable of the power tool reg-
ularly and have it replaced by a recognised spe-
cialist when damaged.
- Check extension cables regularly and replace
them when damaged.
- Keep the handle dry, clean and free of oil and
grease.
15. Pull the connector out of the socket
- When the power tool is not in use, prior to main-
tenance and when replacing tools such as saw
blades, drill bits, cutters.
16. Do not leave a tool key inserted
- Before switching on, make sure that keys and ad-
justing tools are removed.
17. Avoid inadvertent starting
- Make sure that the switch is switched off when
plugging the plug into an outlet.
18. Use extension cables for outdoors
- Only use approved and appropriately identified
extension cables for use outdoors.
19. Remain attentive
- Pay attention to what you are doing. Remain sen-
sible when working. Do not use the power tool
when you are distracted.
20. Check the power tool for potential damage
- Protective devices or other parts with minor dam-
age must be carefully inspected to ensure that
they function correctly and as intended prior to
continued use of the power tool.
- Check whether the moving parts function fault-
lessly and do not jam or whether parts are dam-
aged. All parts must be correctly mounted and all
conditions must be fulfilled to ensure fault-free
operation of the power tool.
- Damaged protective devices and parts must be
repaired properly or replaced by a recognised
specialist workshop unless otherwise specified in
the usage instructions.
- Damaged switches must be replaced at a cus-
tomer service workshop.
- Do not use any power tool on which the switch
cannot be switched on and off.
21. ATTENTION!
- The use of other insertion tools and other acces-
sories can entail a danger of injury.
22. Have your power tool repaired by a qualified
electrician
- This power tool conforms to the applicable safety
regulations. Repairs may only be performed by an
electrician using original spare parts. Otherwise,
accidents can occur.
Warning!
This power tool generates an electromagnetic field dur-
ing operation. This field can impair active or passive
medical implants under certain conditions. In order to
prevent the risk of serious or deadly injuries, we recom-
mend that persons with medical implants consult with
their physician and the manufacturer of the medical im-
plant prior to operating the power tool.
Service:
Only have your power tool repaired by qualified spe-
cialists and only with original spare parts. This ensures
that safety of the power tool is maintained.
www.scheppach.com
GB | 29
Publicidad
