Work Pro W PA 6306 Instrucciones De Usuario página 4

EN
GENERAL DESCRIPTION AND FEATURES
DESCRIPTION
They are designed for PA system appli-
cations such as paging, announcements,
intercommunications, background music
and broad-casting in industrial plants,
offices, schools, churches, department
stores, shopping centres, night clubs,
dining rooms, convention halls,
auditoriums and recreation areas.
More kinds of protective for this series:
such as overload, short-circuits of output,
overheat; and you can use it safety and
freely.It's very simple to install, it also
can offer therack brackets according to
your repuirements.
The series amplifiers come with 3 mic-
rophone inputs, 1 AUX, TAPE and CD
input and Microphone inputs are
used with unbalanced microphone.
Auxiliary inputs are provided for high
level signal sources such as radio
tuner, tape recorder, mixer pre amp-
lifier, remote microphone and record
player with ceramic or crystal type
cartridge. Speaker outputs are com-
plete with 8 ohm, 70V and100V on the
terminal strip. An auxiliary output is
equipped for a booster amplifier and a
AUX output is equipped for a tape
Recorder.
Each input volume can be controlled with
the corresponding individual input volume
control and can further be adjusted by
means of a master volume control and
individual bass and treble tone controls.
PA 6306 User Manual/Manual de uso
FEATURES
Three mic inputs
1 AUX, TAPE and CD input.
MIC1 mute other inputs.
6 Zone output.
Each channel has the input level control.
Built-in USB/SD/MMC/ player in models.
Master volume control.
BASS and TREBLE tone control.
Multi-purpose protection---power-on-delay.
over heat, over voltage, over load.
Output---8Ω,70V,100V.
Low distortion.
High signal-noise rated(S/N).
Widely frequence response.
Perfect sound with PA speaker.
Pag. 3