Work Pro W PA 6306 Instrucciones De Usuario página 8

EN
20. FM ANTENNA
This antenna receive FM signals.
21. SOURCE SELECT SWITCH
Music source input select switch, this switch select the CD,AUX or TAPE.
22. "INPUT 2" AND "INPUT 3" INPUTS SENSITIVITY AND XLR PHANTOM 24V SWITCH
INPUT VOLUME CONTROL
By turning these switch onto the "LINE" position the"IN2", "In3" input can be connected
to an audio source with high level signal output. By turning these switches onto the "MIC"
position the "IN2","IN3" input can be connected to a dynamic microphone with low imped-
ance. By turning these switch onto the "24V" opsition connects "the 24V" phantom supply
on XLR of pin2 and pin3 of inputs "IN2","IN3", necessary to operate condenser type micr-
ophone which require this type of external supply. It is recommended to use this switch
with the general volume set on minimum.
23. "INPUT 2" AND "INPUT 3" INPUTS
These three balanced/unbalanced combination type jack (XLR and 6.3mm) inputs, meant for the
connection of condenser type microphone that accepts 24V phantom power, dynamic microphone
(30- 600 ohms) or a high level sound source (e.g. AM/FM tuner, cassette desk, CD player, etc.).
In case you are using, it is necessary to use the switch (22). "Input 1" has a "Voice Priority"
function that excludes all the other inputs as soon as a message is transmitted with a
microphone.
Balanced microphone
Unbalanced microphone
24. AUX INPUTS
The "R" and "L" sockets permit input of the right ("R")and left ("L") channels of an audio source
with a high-level output signal , such as an AM/FM tuner, a cassette deck, a CD player, etc. Use
input sensitivity switch (21),suitable for difference appliances. They are able to take RCA-type
coaxial connectors, and unbalanced signals.
Unbalanced signal (channel L or R)
25. CD INPUT
It is allowed the CD signal to input.
PA 6306
3-pin XLR plug
(seen from welded side)
Earth
User Manual/Manual de uso
Unbalanced microphone
RCA plug
Pag. 7
3-pin XLR plug
(seen from welded side)