Athletic Bike Air Manual De Instrucciones página 7

STEP 3
Remove the nuts (26) and washers (24) and the fixing
42D
screws (21) from the handle bracket (19).
Slide the handle rotation bar (19) through the link tube
on top of the main frame (1). The bar (19) may need a
little lubricant to glide easily.
The bottle support (08) must be mounted on the
03R
connecting tube with the handle's rotation bar
inside it. Therefore, take the bottle holder (08) and
8
52
21 screw the screws (21) back through the bottle holder
40
19 (08).
26
24
Next, assemble the left handle (03L) which is marked
with an "L" on the left side of the end of the Rotation bar
1
(19). Slide the threaded rod from the handle's rotation
bar through the handle pivot.
Place a washer (24) and tighten it with the nut (26) and
24
40 26
attach the external cover (40), you can find it in the
package of screws.
3L
Connect the right handle (03R) in the same way as
described.
7