Publicidad
Idiomas disponibles
Idiomas disponibles
HOW TO USE
On/off Button
Tap to turn the air purifier on/off.
Sensor Switch Button
Tap repeatedly to change the currently displayed pollutant.
SENSOR
Note:
SWITCH
a. When the air purifier is switched on, the air quality sensor needs around 20 seconds to measure
the ambient air quality and generate the display value.
b. The displayed pollutant cycles through PM1, TVOC, PM10, PM2.5.
c. PM1/PM10/PM2.5 shows particle concentration of particles with diameters not larger than 1.0/10/2.5 microns.
Auto/Timer Button
Auto Mode:
AUTO
/TIMER
Tap to turn Auto Mode on/off.
Note: Auto mode uses a sensor inside the air purifier to adjust the fan speed automatically based on your indoor air quality.
Timer:
Press and hold for 5 seconds, then tap repeatedly to set a timer for 1, 2, 4, or 8 hours.
Note:
Wi-Fi Button
Press and hold to configure the air purifier.
Wi-Fi
Note: Please see the App instructions for more information.
Fan Speed Button
Tap to change the fan speed.
SPEED
Note: The fan speed cycles through 1, 2, 3, 4, 5.
UV-C & Ion Button
Tap to turn UV-C and Plasma functions on/off together.
UV-C
ION
Note:
a.
UV-C working mode:
2-h
on
b． UV-C cycles this whole mode every time you turn on the air purifier.
C. Plasma will keep working once you turn this function on.
Sleep Button
Tap to turn Sleep Mode on/off.
SLEEP
Note: All light will be off on Sleep Mode except
is displayed on the screen when the unit is under timer duration.
1-h
0.5-h
1-h
0.5-h
1-h
off
on
off
on
off
3
...
...
dims.
Publicidad
