Publicidad
Idiomas disponibles
Idiomas disponibles
not leave a "flag"or a digital footprint on
your computer so they will never know it was
installed. But when any vehicles has a problem,
a dealership will search for aftermarket parts to
avoid paying for any warranty work.
If you need visual assistance, visit our website to
see some of our example installation videos!
General Disclaimer
Pedal Commander is intended to boost your
vehicle's performance, including its speed and
acceleration capabilities. We hope that drivers
using Pedal Commander products will choose
to drive responsibly, as the manufacturer is not
responsible for any driver's decision to operate a
vehicle in an unsafe or illegal manner.
How to pair the Pedal Commander
Bluetooth
1. Install the Pedal Commander Application from
your mobile store. ( Android & iOS)
2. Turn the ignition on in your, and make sure the
Pedal Commander is on ( at least one led will
be lit).
3.
Make sure the Bluetooth feature on your
smartphone is on, then pair to the Pedal
Commander.
4. Open the application and press "connect"
5. The application will ask for your 6-digital serial
number, this is located on the back of the Pedal
Commander.
6. Now that you are connected, you can control
the Pedal Commander remotely with your
smartphone. You can also customize the visual
properties of the app via the options menu.
7. You're all done!
4
Having issues connecting to the
Pedal Commander Bluetooth?
Here are some simple troubleshooting steps:
1. Make sure you're using a bluetooth compatible
Pedal
Commander (it will have the Bluetooth logo on
the top of the device).
2. Are you running an up to date operating
system on your smartphone? Android phones
require Android 5.1 (released 2/2015) and Apple
phones require iOS 10 (released 9/2016).
3. Is the Pedal Commander turned on? Hit the
white star button on the unit and make sure one
of the modes has an LED light lit above it.
4.
Make sure the Bluetooth feature on your
device is turned on and you are paired to the
device (must be within 15 feet).
5. Do you have the Pedal Commander app
downloaded?
Search "Pedal Commander' in your app store to
download.
6. Once paired, open the app, click "connect"
and input the
6-digit serial number on the back of your Pedal
Commander.
FCC Compliance Statement:
Changes
or
modifications
approved by the manufacturer could void the
user's authority to operate the equipment.
This device complies with Part 15 of the FCC
rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
not
expressly
5
Publicidad
