Kinderkraft LUMI Manual Del Usuario página 23

Cushion adjustment
Adjustment is by means of a Velcro strap (Figure J). By sliding the belt buckle down, you can
adjust the cushion lower, while by pulling the belt buckle up, you can adjust the cushion higher.
Velcro straps on the adjusting belt and cushion are used to stabilize the position of the cushion.
Installation/replacement of batteries in the rocker:
To install or replace the batteries, use a Phillips screwdriver (not included), unscrew the safety
flap from element 2 (one screw) and replace the batteries paying attention to polarity. Follow
the figure H.
Replacing the remote control batteries:
To replace the batteries, follow the drawing on the back of the remote control. Press and hold
the button, and then slide out the battery compartment. Discard the dead battery and insert a
new one, paying attention to the polarity (plus up). Slide the battery compartment.
Product control:
You can control the rocker using a remote control (4) as well as the touch panel on the foot of
the rocker (Figure F).
When the device is turned on, the LED above the On/Off icon lights up.
Bluetooth control.
In addition, you can connect the rocker to your phone via Bluetooth to play your child's favourite
melody. To connect, activate the Bluetooth function on your phone and select "swing chair"
(Figure G). When the connection is active, you will hear a characteristic sound coming from the
rocker.
Audio files support
You can play audio files via the USB port. Insert the media with the audio files into the USB port.
The rocker supports mp3, wav and wma file formats.
Panel control (Figure F)
On/Off
Swinging speed control. Adjustment from 1 to 5.
Turn on or stop the music.
Switching songs - single click; Volume adjustment on a 4-level scale - press
and hold the button
Swinging time adjustment. Swinging can be activated for 8, 15 or 30
minutes.
23