turbionaire dot 35 WALL Manual De Instrucciones página 12

INSTALLATION (Dot 35 Wall Black)
Note: When the range hood and appliance supplied with energy other than electricity are
simultaneously in operation, the negative pressure in the room must be not exceed 4 Pa (4 x
10 -5 Bar).
Required minimum distance hood to
Ceramic-glass rings/hotplates
Gas cooker
Coal / oil / stove wood firing
Installation Steps
Note: Do not connect the power cable until the installation is complete! Get a second person
to help you with the installation.
(1) Use a levelling instrument to measure the relative level of the surface of the hanging
plate, and mark the positions for drilling holes.
(2) Use M10 drill bit to open a hole at the mark, insert φ10 expansion rubber plug, fix the
hanging plate with 4 pcs ST6.0x40 tapping screws .
1
65 cm
75 cm
85 cm
2
12