Mobiclinic X-BIKE EVEREST Manual De Instrucciones página 18

ES EN FR IT
7. OPERATION OF THE MONITOR
FUNCTIONAL BUTTONS:
MOD
SET
RESET
FUNCTION AND OPERATIONS:
SCAN
TIME
SPEED
DISTANCE
CALORIES
ODO
SPEED PULSE RATE
ALARM
AUTO ON / OFF and
AUTO START / STOP
DE PT NL
SWE
Press down to select functions. If held down for a long time, the MODE button will turn
completely 0.
To set the time distance and calories pulse values when not in scanning mode.
Press down to reset the time, distance and calories. The current data change is 0. If RESET is held
down for a long time, in addition to the ODO position, all values will be set to 0.
Press the "MODE" button until "SCAN" appears, the monitor will rotate through the 5 functions: time,
speed, distance, calories, ODO and pulse. Each display will be held for 5 seconds.
(1) Count the total time from the start to the end of the exercise.
(2) Press the "MODE" button until "TIME" appears, press the "SET" button to set the exercise time.
When "SET" is zero, the monitor will alarm for 10 seconds.
Displays the current speed.
(1) Count the distance from the start to the end of the exercise.
(2) Press the "MODE" button until "DIST" appears, press the "SET" button to set the exercise distance.
When "SET" is zero, the monitor will alarm for 10 seconds.
(1) Count the total calories from the beginning to the end of the exercise. (2) Press the "MODE"
button until "CAL" appears, press the "SET" button to set the exercise calories.
When "SET" is zero, the monitor will alarm for 10 seconds.
Calculates the total distance travelled, in km, of the product during operation.
Press the MODE button until "PULSE" appears. Before measuring your heart rate, place your palms on
both contact pads and the monitor will display your current heart rate in beats per minute (BPM) on
the LCD after 6 ~ 7 seconds.
Remark: During the process of pulse measurement, due to the locking of the contacts, the
measurement value may be higher than the virtual pulse rate for the first 2 ~ 3 seconds, then it
will return to the normal level. The measured value cannot be considered as the basis for medical
treatment.
The computer will beep when you press the "MODE" / "SET" and "RESET" buttons.
If there is no signal for 4 minutes, the computer will automatically switch off. As long
as the wheel is in motion or any button is pressed, the monitor will be in action.
PL DK
FOLDING EXERCISE BIKE
EVEREST