Monster Clippers MONSTERDRYER Manual página 10

MANUAL CLEANING
1 Carefully remove the external back fi lter by
turning the metal ring in a counter-clockwise
direction.
2 Clean the metal fi lter by using a brush fi rst
and then fi nishing with a clean cloth, making
sure that any dirt that is lodged in the fi lter is
removed.
We highly recommend moistening the cloth with isopropyl alcohol, which
acts as degreaser and removes any possible residues. For professional
users, the manual cleaning process must be done daily. For domestic use,
it can be done weekly.
AUTO CLEANING FUNCTION
This hairdryer features an
components. Please follow the few steps listed below:
Without accessories attached to the dryer (such as the nozzle or diffusor),
turn the dryer on (position 1) for a few seconds to ensure that there are no
hair residues or dust left on the main air outlet.
How to turn on
counterclockwise manner, and pull towards the outside. The hairdryer is
working, then press the button to
3 seconds.
The motor will turn on, in reverse, for 15 seconds while the other buttons are
not active. At the end of the
fi lter and turn on the hairdryer.
10
0000 Manual Monsterdryer 11 talen.indd 10 0000 Manual Monsterdryer 11 talen.indd 10
AUTOCLEANING
: Carefully rotate the external fi lter in a
AUTOCLEANING
COOL SHOT
AUTOCLEANING
function to clean its inner
device, and keep pressed for
session, preposition the external
12-01-21 12:52 12-01-21 12:52