iOttie Velox Manual Del Usuario página 8

The telescopic arm extends from 4–7" and
pivots on a 260° arc. To raise and lower the
arm, loosen the pivot knob. After adjusting,
tighten the knob to secure the arm. You can
also adjust the angle of the mounting face by
tilting or rotating it.
7 in
14 EN
4 in
6 in
Mounting Your Phone
Peel off the protective film on the magnetic
mounting face. Then simply tap your phone
against the mount and the magnets will hold
it in place. Charging will begin automatically.
Using the CryoFlow Technology
Once your phone is attached
to the Velox Pro Mount, the
CryoFlow technology will
automatically turn on and
begin cooling. You are now
ready to start driving.
15