Hella Gutmann mega macs X Manual Del Usuario página 160

9. | Working with the mega macs X
Symbols Name
Vehicle search
Use this symbol to search for a vehicle e.g. through VIN, manufacturer key no. or its HGS regis-
tration number.
Settings
Use this symbol to configure the device.
NOTE
This symbol indicates that steps/actions are highlighted here to which special attention must be
paid when performing work tasks (e.g. recall campaigns).
Direct current voltage
Alternating voltage
Start the measurement
Use this symbol to start a measurement under >Measurements<.
Pause
Use this symbol to stop the current measurement under >Measurements<.
Auto Set
Use this symbol to automatically set the measuring range under >Measurements<.
Measurements settings
Use this symbol to take various settings for signal acquisition and the output of values under
>Measurements<.
General settings
Use this symbol to open general functions/settings under >Measurements<.
Trigger settings
Use this symbol to open trigger setting functions under >Measurements<.
Measurement settings
Use this symbol to open various settings for the measurement under >Measurements<.
Minimum value
Use this symbol to view the minimum value of the entire measurement sequence under >Mea-
surements<.
160
Hella Gutmann
mega macs X