Hella Gutmann mega macs X Manual Del Usuario página 173

Ocultar thumbs Ver también para mega macs X:

Idiomas disponibles

Hella Gutmann

9.4.5.1. Activating the Actuator

First select a vehicle before you can activate an actuator.

For more information about the vehicle selection read the sections Vehicle selection [} 162] and CSM ve-

hicle selection [} 163].

Rotating/moving parts (electric fan, brake calliper piston, etc.)

Danger of cutting or pinching fingers or device parts

Remove the following things from the danger zone before actuating actuators:

- Device parts

Rolling of vehicle

Risk of injury or material damages

Proceed as follows before startup:

1. Apply the parking brake.

2. No gear is engaged.

3. Regard the window with information and instructions.

Danger of short circuit and voltage peaks when connecting the OBD plug

Danger of destruction of automotive electronics

Switch off ignition before connecting the OBD plug to the vehicle.

Proceed as follows to activate the actuator:

1. Plug in the OBD plug in the vehicle's diagnostic connector.

2. Select Diagnostics > Actuators in the App launcher.

Working with the mega macs X | 9.