Publicidad
Idiomas disponibles
Idiomas disponibles
4. Clean & Care
1. Clean & dry all parts after use.
NOTE: Make sure it is unplug before cleaning.
2. Turn the appliance off at the power supply and unplug. Pull up the glass jar off the
main body, pour out any remaining material. then disassemble the blade from the blade
base.
3. Wash glass jar, cover, inner cover and blade base in warm soap water. These parts
can be washed in a dishwasher, as long as they are placed on the top shelf and wash
on a low temperature. Do not exceed 50ºC. Assemble the blade base after cleaning.
Use a cloth to wipe the surface of main body.
4. After cleaning, first assemble the blade into the blade base, then put the seal ring
on the stainless steel blade base, twist the jar in clockwise direction, at last press the
whole jar on the main body.
5. It is better to clean the blade, blade base, axletree per month, suggest to brush a little
esculent oil on the blade shaft and axletree to keep it lubricative
6. Never put the motor or main body into water to clean (fig.1),do not wash it under tap
(fig 1), just clean it with a damp cloth.
The unit is suitable to use usually to keep the motor in a good condition. If not use
please keep it in a dry and ventilative place to avoid the motor be affected with damp.
9
ENGLISH
Publicidad
