Mowox BA 151 Manual De Instrucciones página 138

5. O
PERATION
5.1 C
HARGE CONTROL DISPLAY
The status of charge can be read directly from the battery in your hands. Push the
button "2" and count the number of LED "1" indicating green.
Battery capacity
75% ~ 100%
50% ~ 75%
25% ~ 50%
0% ~ 25%
5.2 B
ATTERY PROTECTION FEATURES
Die batteries have mechanisms to protect the LITHIUM-ION cells and maximize their
life. If the tool stops during use, the following may be the causes:
1. The maximum current draw of the battery has been exceeded, causing it to
automatically stop powering the tool. Release the trigger to reset the tool and
pull the trigger to resume operation.
2. Excessive temperatures will cause the battery to stop powering the tool. Feel
the battery pack, if it is too warm, allow it to cool down.
If the tool still does not work, recharge the battery.
NOTE: The battery pack indicator LED will not work if the battery protection feature
has caused the battery pack to stop powering the tool. Release the tool trigger or re-
move the battery pack from the tool and the battery pack LED indicator will resume
normal function.
Rev. 5
no. of LED on
Charge to more than 1 before storage
138
4
3
2
1
(EN)