Publicidad
Idiomas disponibles
Idiomas disponibles
General setting
Set up brightness:
1. Press Menu button on the monitor screen, select
enter the interface.
2. Press UP and DOWN direction buttons to adjust brightness.
Set up time:
1. Press Menu button on the monitor screen, and select
2. Press direction buttons to change date, time and time displaying mode.
Set up language:
1. Press Menu button on the monitor screen, and select
2. Select the language you need.
Set up sleep mode:
You can set up sleep mode to increase standby time.
1. Press Menu button on the monitor screen, and select
2. Select sleep mode as 1 minute, 5 minutes, 10 minutes, 30 minutes, 60
minutes or off.
Turn on and off status indicator:
If you turn on the status indicator, you can get the working status of
the camera. You can also turn off the status indicator, if you think it will
affect your baby's sleep.
Press Menu button on the monitor screen, and select
(Or Press Menu
SD card:
1. Press Menu button on the monitor screen, and select
management. Then you can view the total capacity and remaining
capacity of your SD card.
2. (Optional) You can format the SD card as you needed, but make sure that
the important data is backed up.
Upgrade:
Make sure your camera is connected to a the 2.4 GHz Wi-Fi.
You can upgrade your camera when the upgrade alarm appears. Or Press
Menu button on the monitor screen, and select
check whether there is a upgrade.
Low battery alarm:
When the camera is low on battery, the low battery alarm will appear on the
monitor screen. Please charge the monitor as soon as possible.
> Light > Status light.)
> Device information to
and press OK to
> Time setting.
> Language.
> Sleep mode.
>
.
> SD card
EN
EN
Publicidad
