Arenti AINANNY Manual Del Usuario página 6

EN
EN
Set up router
The router supports the 2.4GHz WiFi (doesn't support the 5GHz), and is
connected to the WiFi network.Please set the parameters of the router
before connecting the WiFi network, and record the SSID and password of
your WiFi.
5. Pairing of camera and monitor
Power on the camera and the monitor, and they will automatically connect.
If the connection fails, please follow the steps below to pair. The pairing is
distance limited, so make the distance between the camera and the
monitor is no more than 200m.
Unbind the monitor and camera:
1. Press Menu button on the monitor screen, and select
2. Select Camera 1 or Camera 2 which you need to unbind.
3. Long press OK button to release the binding.
Pair the monitor and camera:
1. Press Menu button on the monitor screen, and select
2. Select Camera 1 or Camera 2 which you need to pair.
3. Long press the camera pairing button until you hear the prompt tone.
4. Press OK button on the monitor screen to start pairing.
5. For 2 cameras, repeat step 2 ~ step 4.
Please keep network available
2.4GHz 5GHz
> Camera.
> Camera.