2. CAUTIONS OF THE FIRST USE:
1. The iron has been greased, and as a result, the iron may slightly smoke when switched
on for the first time. After a short while, this will cease.
2. Before using for the fist time, remove any sticker or protective foil from the soleplate.
Clean the soleplate with a soft cloth.
3. Keep the soleplate smooth: avoid hard contact with metal objects.
3. COMPONENT NAME
A. Skirt
B. Spray Nozzle
C. Water tank
D. Water filling cover
E. Spray button
F. Burst button
G. Soft Handle
H. Cord protector
I. Back Cover
J. Indicator light
K. Self cleaning button
L. Steam button
M. Thermostat Dial
4. FILLING WITH WATER:
• Make sure iron is unplugged and the thermostat dial is in the MIN position. Place iron
on the heel rest, tilt forward approximately 45º angle and pour water into the wa-
ter-filling opening to the MAX position of the water tank.
5. VERTICAL STEAM
• " Burst of Steam" can also be applied when holding the iron in vertical position, this is
useful for removing creases from hanging clothes, curtains, etc.